German railway vehicles with standard combustion: DIN5510-2
DIN 5510-2: preventive fire protect in railway vehicle parts 2: Fire behavior and fireside effects of material and parts railway vehicles to prevent burning – Part II: materials and components of the combustion characteristics and combustion complication phenomenon
Germany testing procedures and standards for combustion and combustion emissions in accordance with the classification level of standards DIN 5510-2.
The following parameters were used to describe materials and components (including the body’s internal and external materials) of the act of combustion:
• flammability
• the development of tobacco
• droplet
Test samples must meet the requirements of end-use.
Flammability classification
The flammability classification is defined as 5 and so on, from S1 (only small samples) to S5 (all materials and components), and on the floor for cover SF1 is divided into three levels to SF3.
The development of the classification of tobacco
According to the "smoke" There are two categories: off to visit points of light attenuation classified as a grade two SR1 and SR2.
Droplet classification
According to the droplet is divided into two grades: ST1 and ST2
We had provided materials using train (such as seals, cable, melamine foam ), DIN5510-2 level of firing test and evaluation.
• flammability
• the development of tobacco
• droplet
Test samples must meet the requirements of end-use.
Flammability classification
The flammability classification is defined as 5 and so on, from S1 (only small samples) to S5 (all materials and components), and on the floor for cover SF1 is divided into three levels to SF3.
The development of the classification of tobacco
According to the "smoke" There are two categories: off to visit points of light attenuation classified as a grade two SR1 and SR2.
Droplet classification
According to the droplet is divided into two grades: ST1 and ST2
We had provided materials using train (such as seals, cable, melamine foam ), DIN5510-2 level of firing test and evaluation.
please contact with the Nanjing smart products servics Co., Ltd,
Contact: 025-86583475
site : www.hksmartps.com
we will provide Professional services for you
DIN5510-2铁路车辆防止燃烧－第二部分：材料和构件的燃烧特性和燃烧并发现象
主要关注如下方面：
可燃性分类：S1-S5，SF1-SF3（地板覆盖物）
烟的发展：SR1—SR2
熔滴分类：ST1—ST2
电线电缆多根垂直火焰燃烧:DIN 50266-2-4/ DIN50266-2-5
电线电缆烟雾浓度:DIN EN 61034-2
电线电缆单根垂直火焰燃烧:DIN EN 60332-1-2
1．可燃性分类
对于可燃性分类被定义为5个等级，S1-S5，地面材料分为SF1-SF3三个等级。
从S2到S5这四个可燃性等级通过DIN 54837（气体火焰测试）规定，通过这个测试也能评价烟的发展和熔滴。
对于可燃性分类被定义为5个等级，S1-S5，地面材料分为SF1-SF3三个等级。
从S2到S5这四个可燃性等级通过DIN 54837（气体火焰测试）规定，通过这个测试也能评价烟的发展和熔滴。
S1类被DIN 53438 (第1-3部分)（可燃性材料测试；小火焰点燃性；火焰在表面上的传播）规定。
DIN EN ISO 9239-1地面材料燃烧反应：测试SF1-SF3的等级要求。
Reaction to fire tests for floorings – Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002)
DIN EN ISO 9239-1地面材料燃烧反应：测试SF1-SF3的等级要求。
Reaction to fire tests for floorings – Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2002)
DIN 54837：采用气体火焰测试来决定燃烧等级
Testing of materials, small components and component sections for rail vehicles –Determination of burning behaviour using a gas burner
联系：李工,025-86583475,info@hksmartps.com
江苏南京江东中路118号德盈大厦1421
