塑料燃烧试验机
用途：
本燃烧试验机装置是根据UL94、GB5169、GB4943GB/T2408-1996和IEC标准的要求。
本燃烧试验机主要用于对塑料或薄膜在规定火源直接燃烧下测定塑料的不燃烧性能。以判断塑料耐火等级（HB级、V级、VMT级），
该装置且有准确度，自动计时，操作简单方便等优点。
产品特点及主要技术参数；
由控制箱、燃烧箱、燃烧灯、电磁阀、高压点火器、塑料试品夹具、煤气管和信号控制线组成。
燃烧室：800X580X1020（0.5m3）
燃气：采用高纯度液化石油气体或热值为37MJ/m3的煤气标准试样规格：长125mm、宽13mm、3＜厚度＜13 mm （或者依照试验标准）
四个计时器：预置喷火计时、延燃计时、停燃计时、残灼计时喷管内径：0.375英寸（9.5mm）,长为100mm。
水平燃烧角度：45度，垂直燃烧角度：90度附注：燃烧试验会产生大量有害气体，需将气体排放到室外（最好具有环保措施，另行配置）
Plastic combustion testing machine
Use:
The combustion testing machine is installed in accordance with UL94, GB5169, GB4943GB/T2408-1996 and IEC standards.
The combustion testing machine used in the plastic or film provisions Directly under the fire of burning plastic is not burning performance. To
Fire-resistant plastic judgement grade (HB-class, V-class, VMT level),
The device is accurate and automatic timing, simple operation,
It advantages.
Features and the main technical parameters;
From the control box, burning me, burning lights, electromagnetic valve, high-pressure ignition, plastic goods test fixture, gas pipes and signal the line of control components.
Chamber: 800 X580X1020 (0.5m3)
Gas: The high-grade liquefied petroleum gas or heat value of gas for 37 MJ/m3 Standard sample Specifications: length 125 mm, width 13 mm, 3 <thickness of <13 mm (or in accordance with the standard test)
Four timer: Spitfire preset time, the extension of burning time, stop burning time, burning residual time
Nozzle diameter: 0.375 inches (9.5 mm), length of 100 mm.
The level of combustion angle: 45 degrees, vertical combustion angle: 90 degrees
Note: combustion test will have a lot of harmful gases, will be required to outdoor gas emissions (with the best environmental protection measures, a separate configuration)
联系：简户仪器（北京）有限公司,010-81237540,
北京朝阳区建国路88号现代城SOHO2906#
